商品描述

價格說明

聯系我們

加工定制

否

牌號

FC51

顏色

本色

特性

增強;玻纖增強;耐磨;高剛性;耐高溫

經銷商

東莞市博琪塑膠

用途

電子領域 家用電器 汽車應用 小家電

產地

美國

加工方式

注塑級

是否進口

是

材質

PET

產品規格

25kg

銷售方式

品牌經銷

類型

標準料

可售賣地

全國

品牌

杜邦

Advantages of DuPont PET plastic raw materials in the United States:

1. It has good mechanical properties, with an impact strength 3-5 times that of other films, and good bending resistance.

2. Resistant to oil, fat, enoic acid, dilute alkali, and most solvents.

3. It has excellent resistance to high and low temperatures, and can be used for a long time within the temperature range of 120 ℃. It can withstand high temperatures of 150 ℃ and low temperatures of -70 ℃ for short-term use, and has little impact on its mechanical properties at high and low temperatures.

4. Low permeability of gas and water vapor, with excellent gas resistance, water, oil, and odor resistance.

5. High transparency, can block ultraviolet rays, and has good glossiness.

6. It is non-toxic, odorless, and has good hygiene and safety, and can be directly used for food packaging

Characteristics of DuPont PET plastic raw materials in the United States:

PET is a milky white or pre yellow highly crystalline polymer with a smooth and shiny surface. Creep resistance, fatigue resistance, wear resistance, and dimensional stability are good, with low wear and high hardness. It has the greatest toughness among thermoplastic materials: good electrical insulation performance, less affected by temperature, but poor corona resistance. Non toxic, weather resistant, stable against chemicals, low water absorption, resistant to weak acids and organic solvents, but not resistant to hot water immersion or alkali.

PET resin has a high glass transition temperature, slow crystallization rate, long molding cycle, long molding cycle, high molding shrinkage rate, poor dimensional stability, brittle crystallization molding, and low heat resistance.

Through the improvement of nucleating agents, crystallization agents, and glass fiber reinforcement, PET not only possesses the properties of PBT, but also has the following characteristics.

1. The thermal deformation temperature and long-term use temperature are the highest among thermoplastic general engineering plastics

2. Due to its high heat resistance, reinforced PET is immersed in a soldering bath at 250 ℃ for 10 seconds without deformation or discoloration, making it particularly suitable for preparing electronic and electrical parts for soldering:

3. The bending strength is 200MPa, the elastic modulus reaches 4000MPa, and the creep and fatigue resistance are also good. The surface hardness is high, and the mechanical properties are similar to those of thermosetting plastics.

4. Due to the fact that ethylene glycol used in the production of PET is almost half cheaper than butanediol used in the production of PBT, PET resin and reinforced PET are the lowest priced engineering plastics with high cost-effectiveness

Application fields of DuPont PET plastic raw materials in the United States:

PET is mainly used for fibers, with a small amount used for films and engineering plastics. PET fibers are mainly used in the textile industry. PET film is mainly used for electrical insulation materials, such as capacitors, cable insulation, printed circuit wiring substrates, electrode slot insulation, etc. Another application area of PET film is film substrate and baseband, such as film, X-ray film, recording tape, electronic computer tape, etc. PET films can also be made into metallized films by vacuum aluminum transfer, such as gold and silver wires, micro capacitor films, etc. Another use of PET is in blow molded products, used for packaging polyester bottles, food bottles, cosmetics bottles, bottled water bottles, and so on.

Glass fiber reinforced PET is suitable for the electronic, electrical, and automotive industries. It is used for various coil frames, transformers, television sets, recorder components and casings, car lampholders, lampshades, incandescent lampholders, relays, rectifiers, etc